For all your shipping questions visit suddenshipping.com
For all your shipping questions visit suddenshipping.com
The cutting wheel is powered by the hydraulic remotes on your Skid Steer and the swing cylinder is controlled with a 12v diverter valve. The off set rotor design for greater visibility and needle valve for precise swing control makes the S24 & S28 comfortable to operate. 34 teeth on a 24” cutter means less cutting for each tooth resulting in longer tooth life and smother cutting for less wear on your Skid Steer.
Units are shipped with standard skid steer quick attach, 12v cigarette light plug, and flat-face quick couplers. The floating deflector contains the chips and debris and can be swung completely out of the way to cut close to fences.
Grease zerks and replaceable brass bushings provided at major pivot points for extended service life. Heavy tooth population makes finer mulch and allows much smoother operation.
For high flow and higher HP skid steers the S28 adds a high volume hydraulic motor and a gearbox that increases the torque to the cutting head. Giving you the best of precision, power and speed in your grinding. The S24 and S28 ship with a convenient 12V cigarette lighter plug to power the diverter valve.
| Model | Motor Option |
10 GPM | 12 GPM | 15 GPM | 20 GPM | 24 GPM | 30 GPM | 35 GPM | 40 GPM |
| S14 | S250 | 15 min | 10 min | 8 min | -- | -- | -- | -- | -- |
| S450 | 18 min | 12 min | 10 min | 6 min | -- | -- | -- | -- | |
| S18 | S450 | 20 min | 15 min | 12 min | 10 min | -- | -- | -- | -- |
| S550 | 20 min | 15 min | 12 min | 10 min | 8 min | -- | -- | -- | |
| S650 | -- | -- | -- | -- | 15 min | 7 min | 6 min | 5 min | |
| S24 | S450 | -- | -- | -- | 20 min | 12 min | -- | -- | -- |
| S550 | -- | -- | -- | 20 min | 12 min | 10 min | 8 min | -- | |
| S28 | S650 | -- | -- | -- | -- | -- | 6 min | 5 min | 4 min |
| Model | Motor Option |
10 GPM | 12 GPM | 15 GPM | 20 GPM | 24 GPM | 30 GPM | 35 GPM | 40 GPM |
| S14 | S250 | 30 min | 20 min | 12 min | -- | -- | -- | -- | -- |
| S450 | 40 min | 25 min | 15 min | 10 min | -- | -- | -- | -- | |
| S18 | S450 | 50 min | 30 min | 20 min | 15 min | -- | -- | -- | -- |
| S550 | 50 min | 30 min | 20 min | 15 min | 10 min | -- | -- | -- | |
| S650 | -- | -- | -- | -- | 20 min | 15 min | 12 min | 10 min | |
| S24 | S450 | -- | -- | -- | 35 min | 25 min | -- | -- | -- |
| S550 | -- | -- | -- | 35 min | 25 min | 20 min | 15 min | -- | |
| S28 | S650 | -- | -- | -- | -- | -- | 10 min | 8 min | 6 min |
| Model | Motor Option |
10 GPM | 12 GPM | 15 GPM | 20 GPM | 24 GPM | 30 GPM | 35 GPM | 40 GPM |
| S18 | S450 | -- | -- | 60 min | 40 min | -- | -- | -- | -- |
| S550 | -- | -- | 60 min | 40 min | 30 min | -- | -- | -- | |
| S650 | -- | -- | -- | -- | 45 min | 20 min | 15 min | 15 min | |
| S24 | S450 | -- | -- | -- | -- | 50 min | -- | -- | -- |
| S550 | -- | -- | -- | -- | 50 min | 40 min | 30 min | -- | |
| S28 | S650 | -- | -- | -- | -- | -- | 20 min | 15 min | 12 min |
| Model No. | S 18 | S 24 | S 28 |
| Recommended HP Size | 25-80 | 30-80 | 50-120 |
| Maximum HP Size | Check GPM & PSI | Check GPM & PSI | Check GPM & PSI |
| Hydraulic GPM | 12-24 | 20-30 | 26-40 |
| Rotor Size | 24” | 24” | 24” |
| Number of Teeth | 34 | 34 | 34 |
| Tooth Construction | Carbide Steel Bolt-In | Carbide Steel Bolt-In | Carbide Steel Bolt-In |
| Cutting Wheel Speed | 700 RPM | 700 RPM | 800 RPM |
| Cutting Height - Above Ground | No Limit | No Limit | No Limit |
| Cutting Depth - Below Ground | 10” | 10” | 10” |
| Maximum Cutting Depth - Per Pass | 5” | 6” | 6” |
| Maximum Horizontal Cut | 22” | 22” | 22” |
| Swing Arc | 0° | 80° | 80° |
| Hub Torque | 250 Ft.-Lbs. | 250 Ft.-Lbs. | 250 Ft.-Lbs. |
| Over Torque Protection | Relieve Valve | Relieve Valve | Relieve Valve |
| Hitch | Quick Attach | Quick Attach | Quick Attach |
| No. Of Remotes Required - Hydraulic | 1 | 1 | 1 |
| Requires 12 Volt DC | No | Yes | Yes |
| Input Speed | -- | -- | -- |
| Unit Weight (Shipping) Lbs. | 578 | 852 | 995 |
| Width (Shipping) | 48” | 48” | 48” |
| Length (Shipping) | 48” | 56” | 56” |
| Model | Recommended GPM |
Max GPM* | Max PSI | Requires Case Drain |
Hydraulic Couplers |
Motor Options |
| S18 | 12-22 12-27 25-40 |
23 GPM 28 GPM 42 GPM |
|
No Yes** Yes** |
Included Included Not Supplied |
S450 S550 S650 |
| S24 | 20-26 22-32 |
28 GPM 35 GPM |
|
Yes** Yes** |
Included Not Supplied |
S450 S550 |
| S28 | 30-40 | 42 GPM | |
Yes** | Not Supplied | S650 |