STUMP GRINDERS · 3 POINT HITCH

The cutting wheel is powered by the PTO (540) on your tractor with the swing and lift cylinders activated by the standard remotes on the tractor as well. 34 teeth on a 24” cutter and 54 teeth on a 34” cutter means less cutting for each tooth resulting in longer tooth life and smoother cutting for less wear on your tractor. Units are shipped standard with PTO shaft & standard quick couplers. The floating deflector contains the chips and debris and can be swung completely out of the way to cut close to fences. Grease zerks and replaceable brass bushings provided at major pivot points for extended service life. Heavy tooth population makes finer mulch and allows much smoother operation.

Features
1 2 3 4 5 SEE IT IN ACTION
 
 

You and your 60-120 HP Tractor will devour tree stumps, with 54 replaceable teeth, and a 34" rotor at 810 RPM using the 3P 40.


See the Specs


STUMP CUTTING TIMES

Model 20Hp 30Hp 40Hp 60Hp 70Hp 80Hp 90Hp 120Hp
1P24 12 min 10 min 8 min -- -- -- -- --
3P24 -- 8 min 6 min 5 min -- -- -- --
3P34 -- -- -- 3 min 2 min 2 min -- --
3P40 -- -- -- 3 min 2 min 2 min 2 min 2 min
Model 20Hp 30Hp 40Hp 60Hp 70Hp 80Hp 90Hp 120Hp
1P24 30 min 20 min 15 min -- -- -- -- --
3P24 -- 15 min 12 min 10 min -- -- -- --
3P34 -- -- -- 6 min 5 min 4 min -- --
3P40 -- -- -- 6 min 5 min 4 min 3 min 2 min
Model 20Hp 30Hp 40Hp 60Hp 70Hp 80Hp 90Hp 120Hp
1P24 -- -- -- -- -- -- -- --
3P24 -- 45 min 40 min 35 min -- -- -- --
3P34 -- -- -- 20 min 15 min 15 min -- --
3P40 -- -- -- 20 min 15 min 15 min 10 min 8 min

SPECIFICATIONS

Model No. 1P24 3P24 3P34 3P40
Recommended HP Size 20-45 30-50 50-80 60-120
Maximum HP Size 50 60 85 125
Hydraulic GPM -- 5-20 5-20 5-20
Rotor Size 24” 24” 34” 34”
Number of Teeth 34 34 54 54
Tooth Construction Carbide Steel Bolt-In Carbide Steel Bolt-In Carbide Steel Bolt-In Carbide Steel Bolt-In
Cutting Wheel Speed 540 RPM 810 RPM 810 RPM 810 RPM
Cutting Height - Above Ground 10” 18” 25” 25”
Cutting Depth - Below Ground 6” 8” 14” 14”
Maximum Cutting Depth - Per Pass 5” 6” 9” 9”
Maximum Horizontal Cut 22” 22” 32” 32”
Swing Arc 0° 65° 65° 65°
Hub Torque 803 Ft.-Lbs. 803 Ft.-Lbs. 803 Ft.-Lbs. 1,050 Ft.-Lbs.
Over Torque Protection Shear bolt Slip Clutch Slip Clutch Slip Clutch
Hitch Cat I Cat I or II Cat II Cat II
No. Of Remotes Required - Hydraulic 0 1 or 2 2 2
Requires 12 Volt DC No No No No
Input Speed 540 540 540 1000
Unit Weight (Shipping) Lbs. 350 864 1231 1316
Width (Shipping) 48” 40” 48” 48”
Length (Shipping) 48” 42” 53” 54”