• Reset circuit breakers - protect against short circuit damage
  • Brushless design means improved performance with less maintenance
  • 4 Copper windings provide more efficient power generation
  • Oversized windings enhance quality and stability of power
  • Internal speed at load 1,800 RPM
  • Lower Operating Speed increases duty cycle and operating life
  • Speed indicating lights make set up quick and easy
  • Automatic voltage regulation keeps power stable within 1% plus or minus to 56Hz
  • High momentary surge capacity up to 3 times working wattage rating
  • Full Load Connector with locking cover
  • 20 amp duplex receptacle
  • 50 amp welder receptacle
  • Drip Proof design
  • Limited 2 Year/2000 hour Warranty

HOW MUCH GENERATOR POWER DO YOU NEED?

Use the Power Calculator to find out.


Your operation cannot afford to be without power for long. The QC series of generators allow you to take matters into your own hands. These portable power plants are designed to fit tractors from 20 to 200 hp. The extensive QC model line up supports power requirements from 12 Kilowatts to 100 Kilowatts.


Configurations are available for 3 - phase power applications. QC generators are designed with the industrial ruggedness and extended use today’s large farms demand. QC generators run on 4 pole copper windings, not only does this reduce the rpm of the unit but also increases the quality and stability of the power. These high quality windings also give the QC series nearly 3 times momentary surge capacity over their rated power.

These generators are designed to be put into service quickly. The axle mounted design allows most QC’s to be hooked up by one person. Once attached to the tractor It is ready to go where you need it. The Display master allows the operator to set the speed quickly and easily from the seat with easily visible lights that indicate Over, under and Correct operating speed.


QC generators gives you a portable power solution that is up to the 24hr 7 day a week demand and can be a cost effective alternative to installing utility power. Your power requirements on your property can vary by time of year and location. Whether you need, emergency back up, portable in-field repair power, or power for un-serviced locations Baumalight PTO Generators put the power in your Hands.

 


Plug in & Power up


QC Generators keep your operation going.


Source for Power


QC Generator connection panel come with Full Load connectors with a lockable cover and multiple receptacles with overload protection for safe simple operation.


QC Performance


Designed to meet the needs of your operation the QC Generators are built for 24 Hr 7 day a week dependability.

DisplayMaster1


Designed exclusively for Baumalight QC generators, the DisplayMaster1 is your guide for quick, easy setup and an “at a glance” monitor of key performance factors.


  • On board Microprocessor for quick accurate monitoring
  • Solid-State design for rugged performance even in sub-zero conditions
  • Backlit display for quick easy reading
  • Displays Amp usage for each line
  • Displays instantaneous Kilowatt usage
  • Plug-in connectors for easy servicing

Read More ...

HOW MUCH GENERATOR POWER DO YOU NEED?

Use the Power Calculator to find out.


Model Number
Connection
Watts

Momentary

Surge Watts

Required HP.

At 50% Load

Required HP.

At Full Load
120v 20amp duplex

Welder Recept

Voltage
Main Volts
CB. Amps
Phase

Shipping

Weight lbs
QC12
Dedicated
12,000
25,000
9
21
2
240
120/240
50
1
592
QC19
Dedicated
19,000
35,000
16
34
2
240
120/240
90
1
678
QC30
Dedicated
30,000
85,000
20
49
2
240
120/240
125
1
640
QC45
Dedicated
45,000
120,000
31
75
2
240
120/240
175
1
945
QC55
Dedicated
55,000
150,000
42
89
2
240
120/240
225
1
1037
QC65
Dedicated
65,000
180,000
48
102
2
240
120/240
250
1
1156
QC80
Dedicated
80,000
225,000
55
122
2
240
120/240
320
1
1335
QC100
Dedicated
100,000
300,000
71
153
2
240
120/240
400
1
1485
QC30-2
Parallel Low WYE
30,000
85,000
20
49
2
208
120/208
100
3
779
QC45-2
Parallel Low WYE
45,000
120,000
31
75
2
208
120/208
150
3
995
QC68-2
Parallel Low WYE
68,000
190,000
50
105
2
208
120/208
250
3
1160
QC105-2
Parallel Low WYE
105,000
315,000
72
155
2
208
120/208
380
3
1474
QC30-3
Series High Delta
30,000
85,000
20
49
2
240
120/240
100
3
779
QC45-3
Series High Delta
45,000
120,000
31
75
2
240
120/240
150
3
995
QC68-3
Series High Delta
68,000
190,000
50
105
2
240
120/240
225
3
1160
QC105-3
Series High Delta
105,000
315,000
72
155
2
240
120/240
360
3
1474
QC30-4
Series High WYE
33,000
85,000
20
49
0
n/a
277/480
50
3
779
QC45-4
Series High WYE
50,000
120,000
31
75
0
n/a
277/480
70
3
995
QC68-4
Series High WYE
76,000
190,000
50
105
0
n/a
277/480
100
3
1160
QC105-4
Series High WYE
113,000
315,000
72
155
0
n/a
277/480
150
3
1474
QC50-6
Dedicated
50,000
130,000
35
80
0
n/a
347/600
60
3
1010
QC75-6
Dedicated
75,000
200,000
52
110
0
n/a
347/600
90
3
1175
QC100-6
Dedicated
100,000
300,000
71
153
0
n/a
347/600
120
3
1485