Strike Force

Precision Strike Force is the term that best describes the MX530 and MX748. These excavator versions of the Brush Fire bring together power and precise control. Search and destroy, paired with an excavator an operator can mulch around objects reducing casualties of innocent bystanding trees while removing the cumbersome brush. Excavators can also go where tractors and skid steers fear to tread. This gives you greater access to areas that have had to be cleared by hand in the past. Clearing stubborn brush from steep ditches from the comfort and safety of the level ground. Reaching over and around objects is no problem with the proven brush clearing appetite of Brush Fire.

1 2 3 4 5 6 7 8
 

 

Model No.
MX 530
MX 748
Path Width
40”
62”
Rotor Width
30”
48”
Maximum Engine HP
Check GPM & PSI
Check GPM & PSI
Minimum Engine HP
15 HP
35 HP
Maximum Brush Size
7"
12"
Cutting Depth
1.5" Above to 1" Below Grade
1.5" Above to 1" Below Grade
Number of Cutters
64
104
Slashes Per Second
2400 - 4000
3250 - 8800
Hitch Type
Excavator
Excavator
Hitch Size
Universal
Universal
System Protection
Built-in Relief
Built-in Relief
Shipping Size (LxWxH)
44”x 44”x 48”
64”x 36”x 40”
Unit Weight
1036 LBS.
1500 LBS.
Mounting Options

Weld any existing mount to the BAUMALIGHT flat plate, providing countless options, value and economy. Contact your nearest authorized BAUMALIGHT dealer for specific information about all other mounting systems specific to your machine.

Motor Specifications

Model Recommended
GPM
 Max.
GPM*		 Max.
PSI		 Requires Case Drain Hydraulic Couplers Shipping Weight Motor Options
MX 530 12-20 GPM 20 GPM 3000 PSI No Not Supplied 1036 LBS A450

12-24 GPM 24 GPM 3000 PSI Yes Not Supplied 1050 LBS B550

16-25 GPM 30 GPM 4500 PSI Yes Not Supplied 1120 LBS C530

19-30 GPM 35 GPM 4500 PSI Yes Not Supplied 1120 LBS C540

25-35 GPM 40 GPM 4500 PSI Yes Not Supplied 1120 LBS C550
               
MX 748 16-25 GPM 30 GPM 4500 PSI Yes Not Supplied 1520 LBS C530

19-30 GPM 35 GPM 4500 PSI Yes Not Supplied 1520 LBS C540

25-35 GPM 40 GPM 4500 PSI Yes Not Supplied 1520 LBS C550

28-45 GPM 50 GPM 4500 PSI Yes Not Supplied 1520 LBS C570

38-50 GPM 60 GPM 4500 PSI Yes Not Supplied 1520 LBS C590


Brush Cutting Sizes

A450 Hydraulics
 Operation
 12 GPM
 15 GPM
 18 GPM
 20 GPM
 21 GPM
Double Brush Size for “Stop & Chew” Cutting ** 2500 PSI
 Slow Forward
 0.75” Brush
 1” Brush
 1.25” Brush
 1.5” Brush
 WARNING*
3000 PSI
 Slow Forward
 1” Brush
 1.25” Brush
 1.5” Brush
 2” Brush
 WARNING*
RPM
832 RPM
 924 RPM
 1088 RPM
 1215 RPM
  

B550 Hydraulics
 Operation
 12 GPM
 20 GPM
 22 GPM
 25 GPM
 26 GPM
Double Brush Size for “Stop & Chew” Cutting ** 2500 PSI
 Slow Forward
 0.75” Brush
 1.5” Brush
 1.75” Brush
 2.25” Brush
 WARNING*
3000 PSI
 Slow Forward
 1” Brush
 2” Brush
 2” Brush
 2.5” Brush
 WARNING*
   
RPM
693 RPM 1201 RPM 1324 RPM 1490 RPM  

C530 Hydraulics
 Operation
 16 GPM
 19 GPM
 22 GPM
 25 GPM
 40 GPM
Double Brush Size for “Stop & Chew” Cutting **
 2500 PSI
 Slow Forward
 1” Brush
 2” Brush
 2.25” Brush
 2.5” Brush
 WARNING*
3000 PSI
 Slow Forward
 1.5” Brush
 2.25” Brush
 2.5” Brush
 3” Brush
 WARNING*
3500 PSI
 Slow Forward
 2” Brush
 2.5” Brush
 3” Brush
 3.5” Brush
 WARNING*
4000 PSI
 Slow Forward
 2.5” Brush
 3” Brush
 3.5” Brush
 4” Brush
 WARNING*
RPM
 1100 RPM 1350 RPM 1500 RPM 1800 RPM

C540 Hydraulics
 Operation
 19 GPM
 25 GPM
 27 GPM
 30 GPM
 40 GPM
Double Brush Size for “Stop & Chew” Cutting ** 3000 PSI
 Slow Forward
 2” Brush
 3” Brush
 3.5” Brush
 4” Brush
 WARNING*
3500 PSI
 Slow Forward
 2.5” Brush
 3.5” Brush
 4” Brush
 4.5” Brush
 WARNING*
4000 PSI
 Slow Forward
 3” Brush
 4” Brush
 4.5” Brush
 5” Brush
 WARNING*
RPM
1050 RPM
 1500 RPM
 1700 RPM
 1800 RPM
  
1400 rpm is optimum cutting performance

C550 Hydraulics
 Operation
 25 GPM
 27 GPM
 30 GPM
 35 GPM
 40 GPM
Double Brush Size for “Stop & Chew” Cutting ** 3000 PSI
 Slow Forward
 3” Brush
 3.5” Brush
 4” Brush
 4.5” Brush
 5” Brush
3500 PSI
 Slow Forward
 3.5” Brush
 4” Brush
 4.5” Brush
 5” Brush
 5.5” Brush
4000 PSI
 Slow Forward
 4” Brush
 4.5” Brush
 5” Brush
 5.5” Brush
 6” Brush
RPM
 1340 RPM
 1500 RPM
 1600 RPM
 1875 RPM
 2140 RPM
1400 rpm is optimum cutting performance

C570 Hydraulics
 Operation
 27 GPM
 30 GPM
 35 GPM
 40 GPM
 45 GPM
Double Brush Size for “Stop & Chew” Cutting ** 3000 PSI
 Slow Forward
 3.5” Brush
 4” Brush
 4.5” Brush
 5” Brush
 5.5” Brush
3500 PSI
 Slow Forward
 4” Brush
 4.5” Brush
 5” Brush
 5.5” Brush
 6” Brush
4000 PSI
 Slow Forward
 4.5” Brush
 5” Brush
 5.5” Brush
 6” Brush
 6.5” Brush
RPM
 1100 RPM
 1220 RPM
 1400 RPM
 1630 RPM
 1830 RPM
1400 rpm is optimum cutting performance

C590 Hydraulics
 Operation
 35 GPM
 40 GPM
 42 GPM
 45 GPM
 50 GPM
Double Brush Size for “Stop & Chew” Cutting ** 3000 PSI
 Slow Forward
 4.5” Brush
 5” Brush
 5.25” Brush
 5.5” Brush
 6” Brush
3500 PSI
 Slow Forward
 5” Brush
 5.5” Brush
 5.75” Brush
 6” Brush
 6.5” Brush
4000 PSI
 Slow Forward
 5.5” Brush
 6” Brush
 6.25” Brush
 6.5” Brush
 7” Brush
RPM
1100 RPM
 1260 RPM
 1300 RPM
 1420 RPM
 1570 RPM

      *NOTICE: This value must never be exceeded or warranty is voided. Will cause equipment damage.
** Do not double for top down mulching with excavators.