Get Results

With direct drive from the engine all the way through the heavy duty gear box to the teeth the MF860 delivers ultimate cutting power. This could be the greediest Brush Fire to date, when paired with a 70 HP tractor with hydrostatic drive this hungry mulcher is ready to devour brush up to 6 inches in diameter. Its appetite is not satisfied above ground, because of the higher torque you can adjust this monster to mulch below grade. The MF860 is not limited to reverse only, drive forward over your mulch and turn it into dust. Also unique on the PTO Brush Fire is the opening cutting shield, this allows you to adjust for a better high angle of attack on bigger brush or keep it closed and control the mulch for even finer results. Trails and fence lines won’t know what hit them.

Image Gallery: 1 2 3 4
 


Model No.
MF 860
Path Width
75”
Rotor Width
60”
Maximum Engine HP
70 HP
Minimum Engine HP
45 HP
PTO RPM
540
Maximum Brush Size
6”
Cutting Depth
1.5” Above to 1” Below Grade
Number of Cutters
126
Slashes Per Second
7560
Hitch Type
3-Point Hitch
Hitch Size
CAT II
System Protection
Slip Clutch
Shipping Size (LxWxH)
80”x 48”x 65”
Unit Weight
2150 LBS.

PTO Drive | Maximum Brush Cutting Sizes

Gear Selection Operation 45
Engine
HP		 50
Engine
HP		 60
Engine
HP		 70
Engine
HP		 71
Engine
HP
Low Gear Slow Reverse 1” Brush 1.5” Brush 2” Brush 2.5” Brush WARNING*
Stop & Chew 1.5” Brush 2” Brush 3” Brush 4” Brush WARNING*
Creeper Slow Reverse 2” Brush 2.5” Brush 3” Brush 4” Brush WARNING*
Stop & Chew 2.5” Brush 3” Brush 4” Brush 5” Brush WARNING*
Hydrostatic Slow Reverse 2.5” Brush 3” Brush 4” Brush 5” Brush WARNING*
Stop & Chew 3” Brush 4” Brush 5” Brush 6” Brush WARNING*
RPM
1800RPM 1800RPM 1800RPM 1800RPM 1800RPM
*NOTICE: this value must never be exceeded or slip clutch will burn, warranty is void.