Get Results

Operator comfort and precise manoeuvres are what set apart Brush Fire skid steer models. Built with you in mind before you even get in the machine. Using industry standard quick attach and quick couplers (standard on A450 and B550 motors) your Brush Fire is hooked up in less than a minute. A Step Point with grip pad also makes getting in a whole lot easier. Once you are in the cab the full controls are at your command. The easily viewable gauges give you the information you need to optimize your cutting results. The hydraulic system is designed with flex couplers to prolong life by protecting the motor bearing. The super strength timer belt is designed to drive the rotor without slipping while the built in relief valves protect the system all without the need to stop and change a shear pin. The Brush Fire hydraulic drive allows you to move slowly if the terrain and obstacles demand it, without compromising the clearing performance. Mounted on the boom the Brush Fire can reach high and hungrily mulch down from the top. The view of the action is right in front of you, so sit back relax and prepare to lay waste to whatever is in your path.

 

 
Model No.
MF 548
MF 760
Path Width
62”
75”
Rotor Width
48”
60”
Maximum Engine HP
Check GPM & PSI
Check GPM & PSI
Minimum Engine HP
35 HP
60 HP
Maximum Brush Size
5”
10"
Cutting Depth
1.5" Above to 1" Below Grade
Number of Cutters
104
126
Slashes Per Second
2750 - 6700
4620 - 8400
Hitch Type
Skid Steer
Skid Steer
Hitch Size
Universal
Universal
System Protection
Built-in Relief
Built-in Relief
Shipping Size (LxWxH)
64”x 36”x 40”
80”x 48”x 65”
Unit Weight
1500 LBS.
2100 LBS.

 



Motor Specifications

Model Recommended
GPM
 Max.
GPM*		 Max.
PSI		 Requires Case Drain Hydraulic Couplers Shipping Weight Motor Options
MF 548 12-20 GPM 20 GPM 3000 PSI No Included 1427 LBS A450

12-24 GPM 24 GPM 3000 PSI Yes Included 1450 LBS B550

16-25 GPM 30 GPM 4500 PSI Yes Not Supplied 1490 LBS C530

19-30 GPM 35 GPM 4500 PSI Yes Not Supplied 1490 LBS C540








MF 760 25-35 GPM 40 GPM 4500 PSI Yes Not Supplied 1980 LBS C550

28-45 GPM 50 GPM 4500 PSI Yes Not Supplied 1980 LBS C570


Brush Cutting Sizes

A450 Hydraulics
 Operation
 12 GPM
 15 GPM
 18 GPM
 20 GPM
 21 GPM
Double Brush Size for “Stop & Chew” Cutting ** 2500 PSI
 Slow Forward
 0.75” Brush
 1” Brush
 1.25” Brush
 1.5” Brush
 WARNING*
3000 PSI
 Slow Forward
 1” Brush
 1.25” Brush
 1.5” Brush
 2” Brush
 WARNING*
RPM
832 RPM
 924 RPM
 1088 RPM
 1215 RPM
  

B550 Hydraulics
 Operation
 12 GPM
 20 GPM
 22 GPM
 25 GPM
 26 GPM
Double Brush Size for “Stop & Chew” Cutting ** 2500 PSI
 Slow Forward
 0.75” Brush
 1.5” Brush
 1.75” Brush
 2.25” Brush
 WARNING*
3000 PSI
 Slow Forward
 1” Brush
 2” Brush
 2” Brush
 2.5” Brush
 WARNING*
   
RPM
693 RPM 1201 RPM 1324 RPM 1490 RPM  

C530 Hydraulics
 Operation
 16 GPM
 19 GPM
 22 GPM
 25 GPM
 40 GPM
Double Brush Size for “Stop & Chew” Cutting **
 2500 PSI
 Slow Forward
 1” Brush
 2” Brush
 2.25” Brush
 2.5” Brush
 WARNING*
3000 PSI
 Slow Forward
 1.5” Brush
 2.25” Brush
 2.5” Brush
 3” Brush
 WARNING*
3500 PSI
 Slow Forward
 2” Brush
 2.5” Brush
 3” Brush
 3.5” Brush
 WARNING*
4000 PSI
 Slow Forward
 2.5” Brush
 3” Brush
 3.5” Brush
 4” Brush
 WARNING*
RPM
 1100 RPM 1350 RPM 1500 RPM 1800 RPM

C540 Hydraulics
 Operation
 19 GPM
 25 GPM
 27 GPM
 30 GPM
 40 GPM
Double Brush Size for “Stop & Chew” Cutting ** 3000 PSI
 Slow Forward
 2” Brush
 3” Brush
 3.5” Brush
 4” Brush
 WARNING*
3500 PSI
 Slow Forward
 2.5” Brush
 3.5” Brush
 4” Brush
 4.5” Brush
 WARNING*
4000 PSI
 Slow Forward
 3” Brush
 4” Brush
 4.5” Brush
 5” Brush
 WARNING*
RPM
1050 RPM
 1500 RPM
 1700 RPM
 1800 RPM
  
1400 rpm is optimum cutting performance

C550 Hydraulics
 Operation
 25 GPM
 27 GPM
 30 GPM
 35 GPM
 40 GPM
Double Brush Size for “Stop & Chew” Cutting ** 3000 PSI
 Slow Forward
 3” Brush
 3.5” Brush
 4” Brush
 4.5” Brush
 5” Brush
3500 PSI
 Slow Forward
 3.5” Brush
 4” Brush
 4.5” Brush
 5” Brush
 5.5” Brush
4000 PSI
 Slow Forward
 4” Brush
 4.5” Brush
 5” Brush
 5.5” Brush
 6” Brush
RPM
 1340 RPM
 1500 RPM
 1600 RPM
 1875 RPM
 2140 RPM
1400 rpm is optimum cutting performance

C570 Hydraulics
 Operation
 27 GPM
 30 GPM
 35 GPM
 40 GPM
 45 GPM
Double Brush Size for “Stop & Chew” Cutting ** 3000 PSI
 Slow Forward
 3.5” Brush
 4” Brush
 4.5” Brush
 5” Brush
 5.5” Brush
3500 PSI
 Slow Forward
 4” Brush
 4.5” Brush
 5” Brush
 5.5” Brush
 6” Brush
4000 PSI
 Slow Forward
 4.5” Brush
 5” Brush
 5.5” Brush
 6” Brush
 6.5” Brush
RPM
 1100 RPM
 1220 RPM
 1400 RPM
 1630 RPM
 1830 RPM
1400 rpm is optimum cutting performance

C590 Hydraulics
 Operation
 35 GPM
 40 GPM
 42 GPM
 45 GPM
 50 GPM
Double Brush Size for “Stop & Chew” Cutting ** 3000 PSI
 Slow Forward
 4.5” Brush
 5” Brush
 5.25” Brush
 5.5” Brush
 6” Brush
3500 PSI
 Slow Forward
 5” Brush
 5.5” Brush
 5.75” Brush
 6” Brush
 6.5” Brush
4000 PSI
 Slow Forward
 5.5” Brush
 6” Brush
 6.25” Brush
 6.5” Brush
 7” Brush
RPM
1100 RPM
 1260 RPM
 1300 RPM
 1420 RPM
 1570 RPM

      *NOTICE: This value must never be exceeded or warranty is voided. Will cause equipment damage.
** Do not double for top down mulching with excavators.