For all your shipping questions visit suddenshipping.com
For all your shipping questions visit suddenshipping.com
Attack the Underbrush
The BAUMALIGHT Brush Cutt is a skid steer mounted rotary type mower designed with one purpose, to control and dominate brush and dense vegetation. The BAUMALIGHT Brush Cutt is anxious to take on the stringy dense undergrowth that gives other mowers tangled nightmares. Not only does it effectively attack and cut thick brush, the unique blade design reduces the brush to mulch. The blade design also provides the longest possible performance before replacement. The system is designed to give brush torturing performance even on low flow hydraulics (12-24 GPM).
As the rotating rotor mass throws the slasher blades at small diameter trees, the blade slices small sections away as the Brush Cutt advances forward. The curved cutting tips of the slasher blades give the Brush Cutt two cuts per pass of each blade. The leading tip takes a small bite and is immediately followed by the second tip taking another bite at 26- 52 slashes per second with devastating results. Available in either 2 or 4 blade configurations the Brush Cutt's reversible/replaceable blades are made of long lasting 1/4" AR 400 steel.
Standard on all Brush Cutt models is a relief valve. Set at 3000psi this valve disengages the driveline if the hydraulic system pressure is too great protecting both the skidsteer and the Brush Cutt.
The Brush Cutt uses a bevel gearbox capable of handling up to 90HP for final drive output. More durable than conventional direct drive setups these gearboxes prevent shocks from cutting being passed to the drive motor.
Crafted from 1/4" AR 400 steel the unique profile of the slasher blades provides increased cutting surface. The blades' thin reversible profile continuously provides a sharp edge.
To secure the slasher blades to the blade assembly Baumalight uses grade 8 bolts capped off with castle nuts and cotter pins. The blade mount uses a fully welded collar to drop the blade - this additional spacing helps to reduce the blade from binding while in operation.
Using a 3/4" top plate and a 3/8" bottom plate this heavy duty rotor sandwiches the 4-way blade assembly in place.
To protect the output shaft from impact or contamination caused by debris, each model of Brush Cutt is finished off with a heavy duty output shaft shield.
